Hinges
Cabinet and Wardrobe Hinges
Cabinet and wardrobe hinges are basic but crucial parts of cabinet and storage systems. They are available in many different types and models.
Hinges
Features
WARDROBE PIVOTS
327 – (ANSI A8782) – Heavy weight – steel – satin chrome (26D) plated
- For overlay doors 1 3/8″ (35 mm) to 1 3/4″ (44 mm) thick doors not exceeding 150 lbs (60 Kg)
- Ideal for wardrobe doors
- Bearing take vertical and lateral loads
- Designed for mullion of face frame mounting
- Doors can be installed floor-to-ceiling
- Screw holes allow for vertical and horizontal adjustment
- Doors can be opened 180º
- Non-handed
WARDROBE PIVOTS
340 – (ANSI A8753) – Standard duty – steel – plated or prime coated finishes
- For flush, recessed or overlay doors 1 1/8″ (28.6 mm) to 1 3/8″ (35 mm) thick not exceeding 75 lbs (34 Kg)
- Only pivot of its type suitable for floor-to-ceiling doors
- Clean appearance, only hinge pivot shows when door is closed
- Door can be opened 180º
- Elongated screw holes make alignment simple
- Separable leaves of the top assembly permit fast installation
- Bushing at the pivot point assure smooth, silent operation
WARDROBE PIVOTS
341 – (ANSI A8773) – Standard duty – steel – plated or prime coated finishes
- For flush, or recessed doors 1 1/8″ (28.6 mm) to 1 3/8″ (35 mm) thick not exceeding 75 lbs (34 Kg)
- Top header and bottom side frame mounted
- Suitable for floor-to-ceiling doors
- Door can be opened 180º
- Elongated screw holes for easy alignment
- Separable leaves of the bottom assembly for quick, easy installation
- Bushing at the pivot point assure smooth, silent operation
- Edge mortise door leaves – standard practice
WARDROBE PIVOTS
342 – (ANSI A8783) – Standard duty – steel – plated or prime coated finishes
- For overlay doors 1 1/8″ (28.6 mm) to 1 3/8″ (35 mm) thick doors not exceeding 75 lbs (34 Kg)
- Designed for mullion or face frame mounting
- Suitable for floor-to-ceiling doors
- Doors can be opened 180º
- Elongated screw holes for easy alignment
- Mortised door leaves – Standard practice
- Bushings at the pivot point assure smooth, silent operation
- Non-handed
CABINET HINGES
1592 – Button tip – steel – satin chrome (26D) finish
HT1592 – Hospital tip – steel – satin chrome (26D) finish
- Made of heavy .088″ gauge steel
- For 3/4″ (19 mm) thick overlay doors
- Has interleaf design for close door fit
- Elongated screw holes for easy vertical and horizontal alignment
Find A Dealer
With dealers in every major city and region across the United States, you have immediate access to all BEST products.